Search our Article Directory:

Home | Computer | Hardware


Phaser 8400 Ink Uses Not Toner But Solid-ink Technology

By: Joseph James

There are now more affordable color laser printers than ever, ranging from discounted old printers to newer and smaller models. Every small office or working group can now use a high-volume laser printer instead of an ink jet printer. Many different vendors now offer color laser printers that are so inexpensive that even individual users can afford them.

The Phaser 8400 printer uses solid ink technology to deliver fast prints with exceptional color. Also includes features such as Postscript compatibility and color tweaks that you will not get from a entry color laser printer. It may not able to compete with a laser printer's black and white print speed or an ink jet printers for photo quality prints but for the price and performance it is hard to beat

The Phaser 8400 printer is known as a phase-change or a wax-jet printer. Its ink appears to be halfway between that of a laser printer and an ink-jet printer, or that used by offset printing presses. The four colors of ink come in small waxy cubes. To be more precise, the yellow, cyan, black, and magenta inks each come in slightly different shapes. They are inserted into the printer like a toddler's toys, each one into its own slot beneath the hood of the printer.

The Xerox Phaser 8400 is revolutionary. You no longer need complicated software or an over-used front panel LCD to tell you when the ink is low. By simply opening the front of the printer, you can see how much ink has been used directly. More importantly, you can add ink at any time without having to unload or reprogram. Simply drop a new block in the slot.

As opposed to the standard procedure of discarding or recycling cartridges and ink storage units, our machine results in considerably less waste. All that is needed for continued operation are three small pieces. These consist of a "maintenance kit", a "lubricating kit", and a tray to capture any waste material. Monitor these and replace as necessary, and you will have no problems.

Solid ink printers utilize heat and pressure to make an image on paper. The printer melts a small portion of the desired color(s) and sprays the ink onto a heated, rotating drum which transfers the image to paper. The Xerox Phaser 8400 printer has distinct environmental advantages over most low priced printers. Using only 1500 watts of power, the Phaser 8400 uses a fifth less electricity than liquid ink printers and the 600 X 600 dpi (1236 individual nozzles) print head transfers the image in a single pass (four is standard).

The ink sets within seconds on the page, unlike the seeping or blotting that happens when you use an inkjet. You can get the ink off only by scratching with a fingernail as it does not even smudge if you run a damp finger over it. The end result, though dry, still looks almost damp. Color printouts appear with a definite banding in an inkjet printer and a laser printer too has a mild banding effect, but here, even solid-color areas look glossy enough to believe they were painted.

Article Source: http://www.articlekingpro.com

Phaser 8400 ink color laser printer doesn't utilize laser technology. It utilizes ink to make stunning color copies very rapidly. It won't run tons of black & white copies like a laser printer, and it's no competition for an inkjet when it comes to the quality of its images, but it's still pretty terrific. The Phaser 8400 solid ink printer utilizes small solid blocks of yellow, cyan, magenta, and black ink that are specially shaped to be held and used by the printer. The Xerox Phaser 8400 is revolutionary. By simply opening the front of the printer, you can see how much ink has been used.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Hardware Articles Via RSS!

Powered by Article Dashboard